Delphi Drives Technology Discussions at SAE 2006
Delphi to highlight vehicle safety and solid oxide fuel cell technology at SAE
Delphi will participate in panel discussions and present more than 25 papers covering a variety of important subjects at SAE, including satellite radio applications, engine technology advancements, vehicle safety issues, simulated test methodologies, energy efficiency, and more.
"Every year Delphi looks forward to the SAE World Congress, as it provides an opportunity for the brightest engineering minds from around the world to share the latest knowledge of design applications, which essentially drives the industry forward," said Dr. Andrew Brown, Jr., Delphi executive director, engineering competency, product, government affairs & partnerships, and Delphi Technologies.
In addition to presenting papers and participating in technology discussions, Delphi will display its solid oxide fuel cell (SOFC) in the U.S. Fuel Cell Council's Fuel Cell Pavilion, located at booth #1101.
Delphi's SOFC generates auxiliary electric power for stationary, transportation, and military functions.
Delphi has been developing fuel cell technology for more than 10 years, and is a leader among industry-wide efforts to bring SOFC technology to the market place.
Delphi engineers will be participating on two SAE panels:
"Electronic Engine Controls" (Wednesday, April 5, Rm. D2-09/10, 5 p.m.) Peter Olin, Delphi engine algorithm development engineer, will serve as a member of this open discussion panel that will allow for free coverage of topics that focus on technical issues and their effects.
"Recipe of High-Frequency Design Analysis" (Tuesday, April 4, Rm. M2-30, 1:30 p.m.) Manjusha Dawande, Delphi electrical analysis engineer, will be presenting a methodology for developing virtual hardware in a simulated environment for high frequency products, such as satellite digital radio. Specifically, Dawande will discuss common design issues, offer essential design analysis for electro magnetic simulation and avoidance of cross talk issues and cover the analysis and design flow of products.
Delphi will be presenting 27 technical papers at SAE. Four papers expected to draw high interest from attendees include:
2006-01-1321 Passive Sensing of Driver Intoxication (Wednesday, April 5, 2 p.m., Rm. D2-11/12)
The paper depicts a sensor technology that passively and accurately detects a driver's blood alcohol concentration (BAC) by sensing alcohol and CO2 in air drawn from the vehicle's cabin. Located within the sensor, a vapor concentrator increases alcohol sensitivity by using an adsorber to collect the alcohol vapor -- then releases it in a concentrated burst at one-minute intervals. This gives a valid non-intrusive measure of the driver's BAC without requiring any action from the driver.
2006-01-1435 Comparison of Load Distributions Between Human Occupants and ATDs in Normal and Non-Normal Occupant Positions and Postures (Thursday, April 6, 2:30 p.m., Rm. M20-30)
The paper provides an overview of a study that investigates the load differences between Anthropomorphic Test Dummies (ATDs) and live human subjects in relation to various seating postures and conditions. The findings of this study revealed discrepancies of the load patterns between ATDs and live occupants, even when they are in the same height and weight category. Necessary correction factors are also recommended. This study provides a theoretical base to improve the accuracy of the weight based occupant sensing system.
2006-01-0040 2-Step Variable Valve Actuation: System Optimization and Integration of an SI Engine (Monday, April 3, 1:30 p.m., Rm. D3-22/23)
This paper presents the development of a 2-step Variable Valve Actuation strategy for improved fuel economy on spark ignition (SI) engines. The system offers most of the benefit of more complex continuously variable valve lift systems at significantly lower cost and provides ease-of-packaging on new and existing engines. Simulation tools were used to optimize valve lift profiles, develop an enhanced combustion system, and improve both steady state calibration and transient control of the engine. A key emphasis of the work was overcoming challenges to maximize the fuel-economy potential of the strategy. The paper introduces Delphi's 2-step valvetrain system, which features hydraulically actuated, switchable rocker arms, hydraulic lash adjusters, and variable cam phasers. The total system, including the engine management system and controls software, was integrated and tested on engine dynamometers and development vehicles.
2006-01-0296 The Potential of Switched Reluctance Motor Technology for Electro-Mechanical Brake Applications (Monday, April 3, 3:45 p.m., Rm. D3-19)
This paper takes a fresh look at the switched reluctance drive as a possible prime mover technology for electro-mechanical brake applications. The paper presents a study of typical brake patterns obtained from an experimental electro-mechanical brake caliper with a switched reluctance drive. Various implementation options are examined throughout the body of the paper, such as cost savings concepts, electronic design, and control algorithms and motor position sensing.
Other Delphi papers being issued include:
2006-01-0923 Control of Brake- and Steer-by-Wire Systems During Brake Actuator Failure (Wednesday, April 5, 10 a.m., Rm. 02-33)
2006-01-0924 Unified Control of Brake- and Steer-by-Wire Systems Using Optimal Control Allocation Methods (Wednesday, April 5, 10:30 a.m., Rm. 02-33)
2006-01-0553 Application of Six Sigma Methodologies to Improve Requirements Management for Customer Programs (Tuesday, April 4, 9:30 a.m., Rm. W2-62)
2006-01-0840 Controller Integrity in Automotive Failsafe Architectures (Written Only)
2006-01-1357 Executable Specs: What Makes One, and How are They Used? (Thursday, April 6, 10:30 a.m., Rm. W2-68)
2006-01-0170 Hardware/Software Design and Development Process (Monday, April 3, 10:30 a.m., Rm. W2-68)
2006-01-0305 Database Functionality in Engine Management System (Monday, April 3, 1:30 p.m., Rm. W2-68)
2006-01-1058 Co-Simulation Platform for Diagnostic Development of a Controlled Chassis System Systems (Tuesday, April 4, 3:45 p.m., Rm. W2-70)
2006-01-0368 FPGA Considerations for Automotive Applications (Tuesday, April 4, 11 a.m., Rm. W2-68)
2006-01-1602 Development of a Model-Based Powertrain and Vehicle Simulator for ECU Test Benches (Thursday, April 6, 3:45 p.m., Rm. W1-51)
2006-01-1600 Application of Robust Engineering Methods to Improve ECU Software Testing DOE Guidelines on Hydrogen Safety (Thursday, April 6, 2:30 p.m., Rm. W1-51)
2006-01-0479 Design of a Diversity-Antenna Receiver System as Applied to the Satellite Radio System (Tuesday, April 4, 3:45 p.m., Rm. M3-31)
2006-01-1322 Monitoring Driver Physiological Parameter for Improved Safety (Wednesday, April 5, 2:30 p.m., Rm. D2-11/12)
2006-01-0309 Effort Estimation in Model-Based Software Development (Monday, April 3, 3:45 p.m. Rm. W2-68)
2006-01-1187 A Math-Based CAE High-Speed Punch Methodology For Polymer Airbag Cover Design (Thursday, April 6, 4:15 p.m., Rm. M2-30)
2006-01-1188 The Effectiveness of Oxygen in Preventing Embrittlement in Air Bag Inflators Containing Gaseous Hydrogen (Thursday, April 6, 4:45 p.m., Rm. M2-30)
2006-01-0154 Math-Based Design for Sensing Bladders (Monday, April 3, 1:30 p.m., Rm. W2-67)
2006-01-1062 Backpressure Characteristics of Modern Three-Way Catalysts, Benefit on Engine Performance (Wednesday, April 5, 2 p.m., Rm. D2-08)
2006-01-0763 Sensitivity of Contact Electronic Throttle Control Sensor to Control System Variation (Written only)
2006-01-0333 Mechanical, Thermal and Rheological Properties of Polymers Used in Plastic Fuel Tanks (Monday, April 3, 3 p.m., Rm. W1-55)
2006-01-0001 A GENOA - Math-Based Methodology for the Prediction of Mechanical Fatigue Longevity of 3D Woven (Monday, April 3, 9 a.m., Rm. D3- 20/21)
2006-01-0701 Engine Oil Viscometer Based on Oil Pressure Sensor (Tuesday, April 4, 3 p.m., Rm. O2-38)
2006-01-0703 Feasibility of Detecting Antifreeze Leakage in Diesel Engine Oils (Tuesday, April 4, 3:45 p.m., Rm. O2-38)