Issue: Dec 2003


Plante & Moran



Lean Its Not Just for the Shop Floor Anymore

by Karen Juroff

A lean office eliminates waste and saves time and money.

Higher customer expectations, cost-cutting pressures, slimmer margins and reduced lead times are challenges most manufacturers continue to face. Lean Enterprise, a business operating philosophy in which customer value drives manufacturing processes, has provided a solution for many companies by eliminating non-value-added activities helping to reduce lead times, increase productivity and improve quality and throughput.

Lean is not a new concept in the manufacturing industry. For more than 25 years, Lean has been successfully implemented on the shop floor to eliminate waste and increase revenue. It is only recently that companies are using Lean Office as a key productivity factor to streamline and eliminate waste from their office and administrative processes and achieve bottom-line savings.

Consider that 60 to 80 percent of all cost related with meeting a customer demand is an administrative or non-production-related function. Therefore, to be Lean, the concepts must be understood, implemented and sustained throughout the entire company.

Benefits of Lean Office

Office Lean can impact administrative processes at all levels of an organization: Enterprise Level: Streamlines and accelerates those processes that touch external customers and suppliers such as order entry, customer service, accounts payable/receivable processing, marketing/sales, R&D, product development and distribution.

Organizational Level: Streamlines key support processes (e.g. Information Technology, Human Resources, Engineering, Purchasing), identifies internal customer requirements and value, improves communication and crossfunctional cooperation.

Departmental Level: Focuses on objectives, reduces activities that add time but little value, measures progress to Takt Time, creates Flow to reduce hand-off breakdowns, implements Pull and Kanban systems and uses Visual Management to identify issues.

Individual Level: Reduces paperwork, manual entries and errors using Standard Work Procedures, improves organization using 5S, and clarifies individual roles, responsibilities and objectives.

But if applying the same tools and techniques used on the shop floor was so straightforward, why havent more manufacturers become Office Lean? Common reasons include:

  • Lack of Clearly Defined Product Flows
  • Limited Data Collection
  • Lack of Understanding Between Waste and Non-Value-Added Activities in Office Environments
It is common for Lean projects to begin with Value Stream mapping and analysis to optimize one product flow (i.e. Value Stream) at a time. Oftentimes, this is a challenge in an office environment where there are many small, intersecting value streams rather than a clear product flow.

In addition, these value streams may not be visible (e.g. occurring electronically), or may occur less frequently. Nevertheless, the multiple flows of customer demand and need across each desk, service person and computer must be identified and sorted out in order to obtain an accurate picture of the process.

Most organizations collect limited, if any, data on administrative processes. Just as with Lean on the shop floor, Office Lean places great emphasis on data-driven decision making. Typical data for the plant level include cycle time and changeover time. For support and administrative operations, determining what data to include depends on what questions you are trying to answer about your value stream and how you define the product produced by these operations.

For example, if your objective is to reduce days in receivable, it would be helpful to define invoices as the product and identify the total number of invoices issued, cycle time and queue time for processing and collection, and total cycle time. From this information, you can determine where bottlenecks most likely occur and eliminate areas of waste in your future state process.

For Lean to be successful, all activities within a value stream must fall into one of three categories:



  • Value- added adding value or worth to the product or service
  • Non-value-added work that may not directly add worth to a product or service, but is currently required for business or regulatory reasons
  • Waste non-value creating work that can be eliminated immediately
Sometimes it is simple to determine whether an action is value-added in the plant environment. But, for most support and administrative activities, everything seems non value-added. Thus the challenge becomes determining the difference between the nonvalue- added work and waste.

Just as in Lean Manufacturing, waste can be categorized into seven areas (often called the seven deadly wastes).

  • Waste of Overproduction producing too much or producing it before it is needed.
  • Waste of Transportation movement of materials, products or information that does not add value.
  • Waste of Waiting inactive or lost time created when material, information, people or equipment is not ready.
  • Waste of Motion any motion that is not necessary to successfully complete an operation or task.
  • Waste of Over Processing efforts that create no value from the customers viewpoint.
  • Waste of Inventory more information, project, material on hand than the customer needs right now.
  • Waste of Defects work that contains errors, rework, and mistakes or lacks something necessary.
Lean is a proven, company wide, systematic approach to eliminate/minimize waste resulting in the production of goods and services at the lowest possible cost. It is not merely a manufacturing program confined to the shop floor. Lean is every system, every process, and every employee within the company and should extend to include the entire supply chain and its customers as well. It is then that you will truly become a Lean Enterprise!

Karen Juroff is, Manager, Program, Process and Quality Management Services of Plante & Moran, PLLC

Send your comment:
Name: Email:
Phone: Town & Country:
Comment:



























































































































































































































































Automotive Industries
Call For Interviews, News & Advertising

x

Thank You

x